Fastpak™ "Settings Group" Menu Record; Machine Configuration Group - Trane CVHE Information Manual

FastPak™ "Settings Group" Menu Record

Machine Configuration Group:

Menu Item
1 Unit Frequency
2 Unit Type
3 Nominal Unit Tons
4 Refrigerant Type
5 Refrigerant Monitor Type
6 Starter Type
7 Level 2 Contactor Integrity Test (Startup
Contactor Test-Y-D only)
8 Rated Load Amps
9 Motor Heating Constant
10 Current Overload Setting #1
(See Manual for Setup Procedure)
11 Current Overload Setting # 2 (See Manual
for Setup Procedure)
12 Maximum Accel Time Setpt# 1 (See
Manual for Recommend Setpt)
13 (255 Minus Timer Setpt #1 above)
14 Heatsink Start Inhibit Temperature Setpoint
15 External Chilled Wtr Setpoint
16 External Current Limit Setpt
17 Acceleration Time Out Action
18 Motor Temp Protection
19 Motor Winding RTD Type
20 High Pressure Cutout setting
21 Line Voltage Sensing Option
22 Unit Line Voltage
23 Hot Gas Bypass Option
24 Condenser Press. Sensor Option
25 Bearing Temp Sensors Option
26 Discharge Temp Sensor Option
27 Ice Building Option
28 External Analog Inputs
29 Tracer Option
30 TCI Option
Information Manual
Choices
60 HZ, 50 HZ
CVHE & CVHG, CVHF, CVHB,
CVGE, CVAE, FastPak Water
Cooled, FastPak Air Cooled
100 to 1800 Tons
R114, R500, R502
None, PC
Undefined, Adaptive Frequency, Y-
Delta, X-Line, Solid State, Auto,
Transformer, Primary Reactor,
AFDB, SMCDP, Stand Alone No Str
Module
Disable, Enable (Not available on
any FastPak models)
0 to 2,500
0 to 100 Minutes
00 to 31
224 to 255
6 to 64 Seconds
191 to 249 Seconds
°
100.0 to 200.0 F (37.8 to 93.3
° °
in increments of 0.1 F/ C
Installed, Not Installed
Installed, Not Installed
Shutdown, Transition
3 Winding Sensors, MTC Switch
° °
100 Ohm/ 0 C, 75 Ohm/ 75 C
-5 to 500 PSIG
Installed, Not Installed
180 to 6600
Installed, Not Installed
Installed, Not Installed
Installed, Not Installed
Installed, Not Installed
Installed, Not Installed
4-20 mA, 2-10 VDC
Installed, Not Installed
Installed, Not Installed
Default Design/Actual
60 HZ
CVHE
300 Tons
R123
None
Y-Delta
Disable
500
25 Minutes
00
255
27 Seconds
226 Seconds
° ° °
C), 100 F (93.3 C)
Not Installed
Not Installed
Shutdown
3 Winding
Sensors
°
75 Ohm /75 C
15 PSIG for
standard unit 25
PSIG for ASME
unit
Not Installed
460
Not Installed
Not installed
Not installed
Not installed
Not installed
4-20 mA
Not Installed
Not Installed
85