Compressor Phase Currents % Rla; Compressor Line Currents Amps; Compressor Line Voltages; Compressor Power Factor And Watts - Trane CVHE Information Manual

Compressor Phase Currents % RLA

Compressor Phase Currents - % RLA
A xxxx.x % B xxxx.x %

Compressor Line Currents Amps

Compressor Phase Currents - Amps
A xxxx amps B xxxx amps C xxxx amps

Compressor Line Voltages

Compressor Line Voltages
AB xxxx v BC xxxx v
This data is displayed only if the line voltage sensing
option is installed. if not installed, no screen is
displayed.

Compressor Power Factor and Watts

The following is displayed only if the Line Voltage
Sensing Option is Installed AND the starter type is
Not "Adaptive Frequency" or AFD AND Compressor
Power Source is Utility AND External KW is Not
Installed.
Compressor Power Factor:
Compressor KiloWatts:
Information Manual
C xxxx.x %
CA xxxx v
xx %
xxxx KW

Compressor Winding Temperatures

Compressor Winding Temperatures
W1 xxx f/c W2 xxx f/c W3 xxx f/c

Compressor Starts and Running Time

The starts and hours counters are displayed as
follows:
Compressor Starts: xxxxx
Compressor Running Time: HRS:MIN:SEC

Bearing Temperatures #1 and #2

The following will be displayed only if the Bearing
Temp Sensors Option is Installed.
Bearing Temperature 1:
Bearing Temperature 2:

Solid State Starter Heat Sink Temp.

The following will be displayed only if the Solid State
Starter is installed.
Solid State Starter Heat Sink: xxx.x f/c
Press (Next)(Previous) To Continue

HGBP Time

If HGBP is installed in the unit the following screen is
displayed:
HGBP Time: HRS:MIN:SEC
Press (Next)(Previous) To Continue
Compressor Report
xxx.x f/c
xxx.x f/c
19