Refrigerant Monitor; Approach Temperature - Trane CVHE Information Manual

Refrigerant Monitor

The following item is displayed if the Analog
Refrigerant Monitor option is installed.
Refrigerant Monitor: xxx.x PPM
Press (Next)(Previous) To Continue
The following items are displayed if the IPC
Refrigerant Monitor option is installed.
The following screen is displayed if the refrigerant
monitor scanner is installed:
Refrigerant Monitor Mode: [Mode]
Scanner Channel X XXXX PPM [Rfgt Type]
The following screen is displayed if the channel
scanner is not installed:
Refrigerant Monitor Mode: [Mode]
Possible values of Mode are: Warmup, Ready,
Monitor Check, Trouble.
If the PPM is out of range low or high "-Err" and
"++++" respectively are displayed. If the
concentration has not been determined, or the
refrigerant monitor is in "Monitor Check" mode, "-----"
is displayed.
The following is displayed if the channel scanner
option is installed.
Last Rfgt Conc Chan1 Chan2 Chan3 Chan4
PPM [Rfgt Type] XXXX
If the PPM is out of range low or high "-Err" and
"++++" respectively are displayed. If a channel is
inactive, "-----" is displayed.
Refrigerant Monitor Case Temp: XXX.X F
Refrigerant Monitor Bench Temp: XXX.X F
Information Manual
XXXX PPM [Rfgt Type]
XXXX XXXX XXXX
The following is displayed if the IPC Refrigerant
Monitor Auxiliary input option is installed.
Rfgt Mon Auxiliary Input: XX.X mA
Press (Next) (Previous) To Continue

Approach Temperature

Evaporator Approach Temp: XXX.X F
Condenser Approach Temp: XXX.X F
Refrigerant Report
17