Edit Settings; Preferences - Trane TruSense RMWH Installation, Operation And Maintenance Manual

The last 20 calibrations show in chronological order. When
there are 20 calibrations in the list and a new calibration
occurs, the oldest calibration is deleted to make space for
the new calibration to show.
Use the scroll bar to move through the list of events.
Select any calibration event to see a pop-up with details.
Note: The As Found value represents the performance
reading before calibration is performed. The As
Left value represents the performance reading
after calibration is performed.

Edit Settings

To access and edit the device settings that were assigned
during the initial setup, on the dashboard, select the
Settings button.
If password protection was enabled during the initial
setup, on the Password Required pop-up, enter the
correct password.
For help with forgotten passwords or password resets,
contact local Trane Customer Service.
RMWH-SVX001C-EN

Preferences

Use the Preferences option to change the settings for the
language, date and time, password, and brightness of the
device display.
On the Settings screen, select Preferences.
The Preferences screen shows the current values for the
settings. Select the Edit button for the setting to change.
Language, Date and Time, and Password
Note: If the date setting is changed after the initial set up
configuration, the predictive maintenance logs will
need to be reset on each graph to ensure accuracy.
Except for the buttons that show in the screen headers, the
screens and steps used to change the settings for the
language, date and time, and password are the same as
those used during the initial setup.
During the initial setup, the screen headers show the
and buttons. During routine operation, the
screen headers show the
To adjust the settings for the language, date and time, and
password, go to "Initial Setup," p.
through Step 10.
To return to the Settings screen, select
To return to the previous screen, select
Brightness
On the Brightness screen, use the
to increase and decrease the percentage of screen
brightness.
Routine Operation
and buttons.
16, and do Step 2
.
.
and buttons
35