2.6 FRICTION PAD
Before Replacing the Friction Pad
Before replacing the friction pad, reset the PM counter.
1.
Turn the power ON.
2.
Reset the PM counter. (Refer to Chapter 3 "Replacement Procedure of the PM/Yield Parts" of
Field Service Manual)
3.
Turn the power OFF.
Replacing the Friction Pad
1.
Remove the paper feed roller.
2.
Remove the friction pad [A]. (Hooks × 2,
When reinstalling the friction pad:
•
To prevent the friction pad from catching on the sheet [A], place the friction pad while
bending the sheet slightly outward.
D3GQ
(Paper Feed
Roller)
× 1)
14
Friction Pad
SM