Ricoh IM C300 Service Manual page 1591

5 Compression modes
available in transmit
mode
0: MH only
1: Disabled
6- ECM during
7 transmission
Bit 7: 0, Bit 6: 0 = Off
Bit 7: 0, Bit 6: 1 = On
Bit 7: 1, Bit 6: 0 = Not
used
Bit 7: 1, Bit 6: 1 =
Disabled
Switch 04 - Not used (do not change the settings)
Switch 05 - Not used (do not change the settings)
Switch 06 - Not used (do not change the settings)
Switch 07 - Not used (do not change the settings)
Switch 08 - Not used (do not change the settings)
Switch 09 - Not used (do not change the settings)
E-mail Parameters
The initial settings of the following e-mail parameters are all "0" (all parameters disabled).
Switch 00
No FUNCTION
0 MH Compression mode for e-mail
attachments
0: Off
1: On
1 MR Compression mode for e-mail
attachments
0: Off
1: On
2 MMR Compression mode for e-mail
attachments
0: Off
D0CK
0: V.34 communication will not be possible.
If the setting is "Disabled", the bit switch setting is used.
This bit determines the capabilities that are informed to the other
terminal during transmission.
If the setting is "Disabled", the bit switch setting is used.
For example, if ECM is switched on but is not wanted when sending to
a particular terminal, use the (0, 0) setting.
•
V.8/V.34 protocol and JBIG compression are automatically
disabled if ECM is disabled.
•
If the setting is "Disabled", the bit switch setting is used.
COMMENTS
Switches MH compression on and off for files attached
to e-mails for sending.
Switches MR compression on and off for files attached
to e-mails for sending.
Switches MMR compression on and off for files attached
to e-mails for sending.
116
Dedicated Transmission Parameters
SM