Troubleshooting
8.4 TROUBLESHOOTING
8.4.1 MULTITOUCH MISDETECTION BY THE OPERATION PANEL
DUE TO AN AM RADIO SIGNAL
MultiTouch is detected even though only a single point on the operation panel is
•
touched.
If there is an AM radio tower near the machine's location, the person using the
•
operation panel acts as an antenna and radio noise enters the operation panel. As
the result, in spite of only a single point being touched, the machine senses
MultiTouch.
Adjust the MultiTouch sensitivity of the operation panel.
•
Operation panel SP mode > Screen Device Settings > Panel Self Check > MultiTouch
Sensitivity Adjustment
Press [Detection level confirmation].
D0CA/D0C9/D0C8/D0CB
8-56
SM