Ricoh IM C300 Service Manual page 1545

4.4.2 PRINTER SWITCHES
Printer Switch 00 (SP No. 1-103-001)
No Function
0 Select page separation
marks
0: Off
1: On
1 Repetition of data when
the received page is
longer than the printer
paper
0: Off
1: On
2 Prints the date and time
on received fax messages
0: Disabled
1: Enabled
3- Not used
7
Printer Switch 01 (SP No. 1-103-002) - Not used (do not change the settings)
Printer Switch 02 (SP No. 1-103-003)
No Function
0* 1st paper feed
station usage for fax
printing
0: Enabled
1: Disabled
1* 2nd paper feed
D0CK
Comments
0: If a 2 page RX transmission is split, [*] is printed in the bottom
right corner of the 1st page and only a [2] is printed in the upper
right corner of the 2nd page.
1: If a 2 page RX transmission is split into two pages, for example,
[*] [2] is printed in the bottom right corner of the 1st page and only
a [2] is printed in the upper right corner of the 2nd page.
•
This helps the user to identify pages that have been split
because the size of the paper is smaller than the size of
the document received. (When A5 is used to print an A4
size document, for example.)
1: Default. 10 mm of the trailing edge of the previous page are
repeated at the top of the next page.
0: The next page continues from where the previous page stopped
without any repeated text.
This switch is only effective when user parameter 02 - bit 2
(printing the received date and time on received fax messages) is
enabled.
1: The machine prints the received and printed date and time at
the bottom of each received page.
Do not change the settings.
Comments
0: The paper feed station can be used to print fax messages and
reports.
1: The specified paper feed station will not be used for printing fax
messages and reports.
•
Do not disable usage for a paper feed station which has been
70
Bit Switches – 2
SM