Kodak 500 User Manual page 86

C-14
29. Replace the Imaging Guide.
NOTE: Refer to Section 5, Scanner Maintenance (Cleaning
Imaging Guides) for details on how to remove the
Imaging Guides.
Rear Imaging Guide
Saddle Mount
Rear Imaging Guide
Mounting Pin
Front Imaging
Guide Saddle Mount
Transport Plate
30. Swing the Vertical Transport Plate closed and rotate the
release handle 180 counterclockwise (so that the red arrow
aligns with the red rectangle) to latch the plate.
Red Arrow
Red Rectangle
31. Close the Side A
32. Release and lower the Horizontal Transport Plate back into its
original position.
33. Lower the release bar and latch the Front Scan Module into
its original position.
34. Close the Lower Access Door.
35. Close the Upper Access Door.
36. Press the Enter key to return to the Function 65 menu.
A-61408 September 1995