Printing Bar Codes On Documents - Kodak 500 User Manual

Printing Bar Codes
on Documents
C-2
Bar codes can be printed directly on documents or placed on
documents using preprinted bar code labels.
Bar codes must appear with the bars perpendicular to the leading
edge of the document during scanning (as shown).
(fed into the transport first)
In addition, the following must be true:
• The bar code must be at least 0.25 inches (6.3 mm) from the
leading edge of the document.
• The bar code must be at least 0.25 inches (6.3 mm) from the
trailing edge of the document.
• There must be at least 0.25 inches (6.3 mm) of blank space
preceding the start character and following the stop character.
• The bar code can not exceed 11 inches (275 mm) in length.
• The bar code height must be at least 0.38 inches (9.5 mm) or
25% of the bar code length, whichever is greater.
More detailed specifications are provided in the Bar Code Specifi-
cations section, as well as in the document entitled Bar Code
Made Easy (A-61099).
NOTE: Significant reductions in bar code read rates can be
expected if these specifications are not adhered to
closely.
Leading Edge
Trailing Edge
A-61408 September 1995