Kodak 500 User Manual page 85

A-61408 September 1995
24. Lift up and latch the Horizontal Transport Plate into its open
position.
NOTE: If the Patch Reader Accessory is installed, the Patch
Reader must be removed from the mounting plate in
order to lift up the Horizontal Transport Plate.
25. Open the Side Access Door.
NOTE: Do not leave the Side Access Door open more than 5
minutes.
26. Release and open the Vertical Transport Plate by rotating the
release handle 180 clockwise.
27. Remove the appropriate Imaging Guide.
NOTE: Refer to Section 5, Scanner Maintenance (Cleaning
Imaging Guides) for details on how to remove the
Imaging Guides.
28. Remove the bar code from the Imaging Guide.
NOTE: Ensure that all of the transparent adhesive tape is
cleanly removed and the Imaging Guides are free of
finger prints and other marks.
C-13