Table of Contents
Advertisement
The Status bar
2-42
The Status bar indicates the application name, the image address of the
image that is displayed and whether or not it is in Film or Programmed
mode. Informational messages may also be displayed in the Status bar.
NOTE:
If IMC is enabled in Application setup, and the film currently
loaded in the scanner has lead end code, Film will be displayed
in the Status bar at the bottom of the main window. The
information contained in the lead end code can be accessed
by clicking on Film in the Status bar. The Film Mode Info dialog
box will be displayed with the following information:
•
Click OK to close the dialog box.
A-61133 March 2003
Advertisement
Table of Contents
