CALL/VFO SCAN
1
Use Call/VFO Scan to monitor both the Call channel and
the current VFO frequency on the selected band.
2
1 Select the desired band.
3
2 Press [VFO] to select VFO mode.
4
3 Press [CALL] (1 s) to start Call/VFO Scan.
5
•
The 1 MHz decimal blinks while scanning is in progress.
6
4 To quit Call/VFO Scan, press [BAND SEL] for the band
7
being scanned or [CALL].
8
•
When scanning the TX band, you can also press Mic
[PTT] to quit Scan.
9
10
CALL/MEMORY SCAN
11
Use Call/Memory Scan to monitor both the Call channel
12
and the memory channel last used.
13
1 Select the desired band.
2 Press [MR] to enter Memory Recall mode.
14
3 Press [CALL] (1 s) to start Call/Memory Scan.
15
•
The 1 MHz decimal blinks while scanning is in progress.
16
4 To quit Call/Memory Scan, press [BAND SEL] for the
17
band being scanned or [CALL].
18
•
When scanning the TX band, you can also press Mic
[PTT] to quit Scan.
19
20
21
48