Selecting Offset Frequency; Activating Tone Function - Kenwood TM-V7A Instruction Manual

Selecting Offset Frequency

1
Select how much the transmit frequency will be offset
from the receive frequency.
2
1 Select the desired band.
3
2 Press [MNU] to enter Menu mode.
4
3 Select Menu No. 5 (Repeater).
5
6
CALL CALL
7
8
2
9
4 Press [ s s s s s ] , then select Item No. 2 (VHF Offset or
10
UHF Offset).
11
• The current offset frequency appears.
12
CALL CALL
13
14
2
15
16
17
18
19
20
21
24
PWR PWR
VOL SQL
PWR PWR
VOL SQL
1
5 Press [SET] , then select the appropriate offset
frequency.
• The selectable range is from 00.00 MHz to 29.95 MHz
in steps of 50 kHz.
CALL CALL
2
6 Press [SET] again to complete the setting.
7 Press [MNU] again to exit Menu mode.
TM-7VE only: If you have selected "
cannot change the default (7.6 MHz).
Note: After changing the offset frequency, the new offset frequency
will also be used by Automatic Repeater Offset.

Activating Tone Function

Press [TONE] to activate the Tone function.
• Each time you press [TONE] , the selection changes as
shown below.
No Indicator
PWR PWR
VOL SQL
1
" for the offset direction, you
CTCSS
Tone
("T")
("CT")