Call/Vfo Scan; Call/Memory Scan - Kenwood TM-D700 E Instruction Manual

144/440 mhz fm dual bander 144/430 mhz fm dual bander
Table of Contents

Advertisement

CALL/VFO SCAN

Use Call/VFO Scan to monitor both the Call channel and
the current VFO frequency on the selected band.
1 Select the desired band.
2 Press [VFO].
3 Select the desired frequency.
4 Press [CALL] (1 s) to start Call/VFO Scan.
• The 1 MHz decimal blinks while scanning is in progress.
5 To quit Call/VFO Scan, press [CALL] again.
9

CALL/MEMORY SCAN

Use Call/Memory Scan to monitor both the Call channel
and the desired memory channel.
1 Recall the desired memory channel.
2 Press [CALL] (1 s) to start Call/Memory Scan.
• The 1 MHz decimal blinks while scanning is in progress.
• The Call channel on the same band as of the selected
memory channel is used for Scan.
3 To quit Call/Memory Scan, press [CALL] again.
Note: The memory channel last used is scanned even if it has been
locked out.
54

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm-d700aTm-d700eTm-d700ae

Table of Contents