Group Scan - Kenwood TK-780 Series Instruction Manual

. ie revert groups and the groups not locked
out of the scanning sequence are scanned. See PROM Saree belo naa
m Scanning Conventional Systems
When scanning conventional systems, the revert groups and the groups not _
locked: out-of the scanning Sequence are scanned. . Seg KGROUF SCANGs
below.
m Scan Lockout —
i a:programmable:auxiliary key-is programmed with Scan -DEL/ADD;:each
system can be locked out of.the scan sequence manually.. The delete
indicator ( >) will appear in the display when the selected system is locked
out. ©
m@ Scan Revert
You can select revert systems and groups using the System and Group
keys: a
Three types of Scan Reverts which can be programmed by your dealer are ..
available:
e Last Called Revert: The last.system/ group received is assigned as the
new revert system and group.
e. Last Used Revert: The last system/ group responded to is assigned as
the new revert system and group.
e Selected: The last system/ group selected is assigned as the new revert
system and group.
GROUP SCAN
Group Scan is available for both trunked and conventional systems. This feature
is useful when more than one group is programmed in a system. Group Scan is
set by your dealer on request. It scans the revert groups as well as groups that
are allowed to be scanned.
When a call is received, the group indicator shows the group number, and that
group becomes the revert group. Simply press the PTT switch to respond to the
call.
You can also perform Group Scan while using a priority channel. Please contact
your dealer for information concerning Priority Scan.