Sign in today to find solutions:

Don't have an account? Sign up

Kenwood TM-V7A Instruction Manual: Accessory Connections; External Speakers; Microphone; Packet Equipment Connections

Kenwood am/fm radio tuner manual model number: tm-v7e, tm-v7a.

   

ACCESSORY CONNECTIONS

1
External Speakers
2
If you plan to use external speakers, choose speakers
3
with an impedance of 8 . The external speaker jacks
4
accept a 3.5 mm (1/8") diameter mono (2-conductor)
plug. Recommended speakers include the SP-50B and
5
SP-41.
6
7
8
9
10
11
12
Microphone
13
To communicate in the voice modes, plug a 600
microphone equipped with an 8-pin modular connector
14
into the modular socket on the front panel of the
15
transceiver. Press firmly on the plug until the locking tab
clicks.
16
17
18
19
20
21
6
PACKET EQUIPMENT CONNECTIONS
If you intend to use this transceiver for Packet operation,
you will need the following equipment.
Personal computer with communications software
Terminal Node Controller (TNC)
TNC power supply
RS-232C cable
6-pin mini DIN plug (optional PG-5A)
For the DATA connector pins, refer to "PACKET
OPERATION" {page 79}.
Note:
Do not share a single power supply between the transceiver and the
TNC.
Keep as wide a separation between the transceiver and computer as
practical to reduce noise-pickup by the transceiver.
One end of the optional PG-5A cable has not been connectorized.
Attach the appropriate connector that mates with the TNC connector.
RS-232C cable
TNC power
supply
TNC
PG-5A cable
KENWOOD
KENWOOD
FM DUAL
FM DUAL
Transceiver
power supply
KENWOOD
FM DUAL BANDER TM-000
TM-V7

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: