Dte Port 1 Or 2 - Paradyne FrameSaver 9620 User Manual

Maintenance and Troubleshooting

DTE Port 1 or 2

5-4
Label Indication
P1/ P2 Port 1/ Port 2
TXD Transmitted
Data
RXD Received Data
DTR DTE or Data
Terminal Ready
CTS Clear to Send
August 1997
Color What It Means
Green ON – Port 1 is being monitored.
OFF – Port 2 is being monitored.
Green ON – Data sent from the DTE over
interchange circuit BA (ITU 103) is
all 1's.
OFF – Data sent from the DTE over
interchange circuit BA (ITU 103) is
all 0's.
Blinking ON and OFF ( Rate: 5 Hz ) –
Both 1's and 0's are being received
from the DTE; circuit state has
changed at least once during the
sampling interval.
Green ON – Data received by the DTE over
interchange circuit BB (ITU 104) is
all 1's.
OFF – Data received by the DTE over
interchange circuit BB (ITU 104) is
all 0's.
Blinking ON and OFF ( Rate: 5 Hz ) –
Both 1's and 0's are being received
from the DTE; circuit state has
changed at least once during the
sampling interval.
Green ON – DTE is sending a control signal over
interchange circuit CD (ITU 108) to
indicate it is ready to transmit data.
OFF – DTE has stopped sending the control
signal over interchange circuit CD
(ITU 108).
Green ON – DCE is sending a control signal over
interchange circuit CB (ITU 106) to
indicate it is ready to transmit or
receive data.
OFF – DCE has stopped sending the control
signal over interchange circuit CB
(ITU 106).
9621-A2-GB20-30