Paradyne FrameSaver 9620 User Manual page 37

Displaying System Information
4-12
Message What It Indicates
Non-Latching DSU LB A network-initiated
1
Active non-latching DSU
Loopback is currently
running on a 56 kbps
circuit.
PVC Loopback, A PVC Loopback is running
3
DLCI nnnn , interface on the selected DLCI.
Send 511 on Network A 511 test pattern is being
sent over the DDS network
interface.
Send 511 on Port- n A 511 test pattern is being
sent over the specified port
interface.
Send Pattern, A non-disruptive Hex 55
3
DLCI nnnn , interface test pattern is being sent on
a specified multiplexed
DLCI, or a disruptive
Hex 55 test pattern is being
sent on a specified
non-multiplexed DLCI for
the interface.
When status is Active, the
number of sequence, as
well as data errors are
displayed.
1
A non-latching loopback can only be initiated and terminated by the network service
provider.
2
A count of 99999+ means that the maximum number of errors has been exceeded.
3
nnnn indicates a DCLI number of 16 through 1007; interface is Network, Port-1,
Port-2, or the basic rate interface B channel.
August 1997
What To Do
No action needed.
If the test is running but the
network has not initiated it,
change the configuration
option.
See
Chapter 5.
Allow the loopback to
continue.
Press Return ( ) while the
loopback is selected (via the
Command column) on the
interface's Physical Tests
screen ( Path: main/test/
[network/port-1/port-2/BRI]
_ pvc ) to activate or deactivate
the test.
Allow the test to continue.
Press Return ( ) while the
test is selected on the
Network Physical Tests screen
( Path: main/test/physical ) to
activate or deactivate the test.
Allow the test to continue.
Press Return ( ) while the
test is selected on the port's
Physical Tests screen ( Path:
main/test/physical ) to activate
or deactivate the test.
Allow the test to continue.
Press Return ( ) while the
test is selected (via the
Command column) on the
interface's PVC Tests screen
( Path: main/test/ [network/
port-1/port-2/BRI] _ pvc) to
activate or deactivate the test.
2
Device Messages in
9621-A2-GB20-30