Displaying Statistical Information; Physical Performance Statistics For All Interfaces - Paradyne FrameSaver 9620 User Manual

Displaying Statistical Information

Physical Performance Statistics for All Interfaces

9621-A2-GB20-30
Procedure
To display performance statistics:
1. Use the following menu sequence:
Main Menu Status
2. Select the interface and type of information you want to view
(e.g., Performance Statistics
You can clear statistical information to start over when you want to observe and
estimate the frequency or duration of a specific condition (e.g., gathering
information for reporting a problem to the network).
The following sections provide information about the statistical metrics collected.
These statistics appear when Network, Port-1, Port-2, or BRI-B1 Physical is
selected from the Performance Statistics menu. They are only available when the
interface is enabled.
Main Menu Status
[Network/Port-1/Port-2/BRI-B1] Physical
Statistic What It Indicates
Rx Overruns Number of receiver overruns (too many bits) on the interface.
Rx DTR Lost Events Number of times DTR has been lost/lowered on the interface.
Rx Non-octet Frames Number of non-octet frames received on the interface.
Rx CRC Errors Number of cycle redundancy check errors received on the
interface.
Tx CTS Lost Events Number of times CTS has been lost/lowered on the interface.
Tx Underruns Number of transmitter underruns (too few bits) on the
interface.
August 1997
Displaying System Information
Performance Statistics
Port-1 Physical ).
Performance Statistics
4-21