Lmi Reported Dlcis Status - Paradyne FrameSaver 9620 User Manual

LMI Reported DLCIs Status

9621-A2-GB20-30
Use this procedure when the FrameSaver access unit is configured as the user
side of LMI (see the frame relay LMI Personality option). Typically, these statuses
are available on the network interface.
Procedure
To display LMI Reported DLCIs Status:
1. Use the following menu sequence:
Main Menu Status
2. Select the desired interface (Network, Port-1, Port-2, or BRI-B1).
3. Select the desired DLCI.
Field
DLCI
Status
1
Appears for 10 seconds only, before the network changes Deleted to Inactive
and New to Active.
August 1997
LMI Reported DLCIs
Status What It Indicates
16 through 1007 Identifies the Local Management
Interface-reported DLCI numbers
assigned to the selected interface –
the identifying number assigned to
the path between two frame relay
access unit's ports.
DLCI statuses are listed in
ascending order ( i.e., lowest
number first ).
LMI-reported status of the DLCI:
Active
Inactive
1
Deleted
1
New
Displaying System Information
Whether the DLCI is active
(capable of carrying data) in the
frame relay network,
Whether it is inactive,
Whether it has been deleted by
the frame relay network, or
Whether it has been created by
the frame relay network.
4-13