Last Cause Value Messages - Paradyne FrameSaver 9620 User Manual

Maintenance and Troubleshooting

Last Cause Value Messages

5-14
These messages appear in the BRI-B1 Last Cause Value field on the DBM
Interface Status screen when an ISDN BRI DBM is installed and DBM Interface
Status is selected from the Status menu.
All messages are presented in alphabetical order. The Cause Number is also
provided should you need to convert the message to its corresponding ITU
number for your service provider.
Message Cause
No.
Bearer capability 57
not authorized
Bearer capability 65
not implemented
Bearer capability 58
presently not
available
Call awarded and 7
being delivered in
est chnl
Call profile disabled 129
Call profile Invalid 128
Call rejected 21
Call terminated at 130
remote end
Call with requested 86
call id has been
cleared
August 1997
What It Indicates
User has requested a
bearer capability that the
user is not authorized to
use.
Device sending this cause
does not support the bearer
capability (i.e., channel
type) requested.
Bearer capability requested
is supported by the device
generating the cause, but it
is not available at this time.
An incoming call is being
connected to an already
established channel that is
used for similar calls.
Call received by the ISDN
BRI DBM, but Call Profile
received is invalid; it does
not match with an enabled
ISDN Call Profile.
An invalid remote caller ID;
that is, the Calling ID is not
an authorized phone
number.
Equipment sending the
cause does not want to
receive the call at this time.
Remote DBM rejected or
terminated the call.
Network has received a call
resume request, but the call
had been cleared after it
was suspended.
What To Do
Arrange for the desired
capability.
1. Determine which bearer
capability is not
supported.
2. Remove it.
3. Retry the call.
Retry at another time.
No action needed.
Enable ISDN Call Profile
status. (Path: main/control/
isdn_call_profile)
No action needed.
No action needed.
Retry the call.
Verify that the remote
DBM's call profile is
correct.
No action needed.
9621-A2-GB20-30