Pfd Bezel Keys - Garmin G500 Pilot's Manual

1.4.1.2

PFD Bezel Keys

NOTE: See section 5.4 for autopilot functions using the PFD Bezel Keys.
Heading (HDG)
Selects Heading Select mode. This is the default mode for the PFD knob.
Pressing the PFD knob in Heading mode will center the Heading Bug on the
current Heading. Set the heading bug on the HSI by turning the PFD knob after
pressing the HDG key.
Course (CRS)
Selects Course Select mode. Pressing the PFD knob in Course mode will
center the CDI for a VOR or GPS OBS course.
Altimeter (ALT)
Selects Altitude Select mode. Pressing the PFD knob in Altitude Select mode
will enter the current altitude in the Altitude Select window. Set the Altitude Bug
by turning the PFD knob after pressing the ALT key.
Altitude Bug
Figure 1-19 Pressing PFD Knob Sets Altitude Select to Current Altitude
190-00601-02 Rev. J Garmin G500/G600 Pilot's Guide
TOC
Altitude Select Window
Current Altitude
Barometric Setting
Cover
1-17