Cleaning The Sensor; Replacing The Thumb Wheel - Trane Wired Temperature Sensors Installation, Operation And Maintenance Manual

Maintenance and Troubleshooting

Cleaning the Sensor

NOTICE
Equipment damage!
Spraying glass cleaner or any other solution directly on the sensor may damage it.
You can clean the sensor by applying glass cleaner to a soft, non-abrasive cloth, and gently wiping
the face, including the buttons and LCD display. Use of a pre-moistened towelette designed for lens
or screen cleaning is also acceptable.
Avoid inadvertent pressing buttons on sensors that have them or the keypad on the display sensor,
as this may result in an unwanted timed override or settings change.

Replacing the Thumb Wheel

If you need to replace a setpoint thumb wheel, see
(optional), " p.
32
21.
"Changing the Setpoint Thumb Wheel
BAS-SVX10C-EN