Table of Contents
Advertisement
RUSKA 7750i
Users Manual
Wood or metal boxes do not absorb shock when dropped and
therefore are not recommended.
If the original packaging and shipping materials have been retained, use them for packing
the ADTS. If the ADTS is being packed for long-term storage (more than 30 days), place
a desiccant bag inside the box.
The ADTS must be prepared for shipment in the following manner:
1. Fluke has an RMA procedure in place. Please contact the Customer Service Center to
This information plus the RMA number must be attached to the unit when it is shipped to
Fluke Calibration. There will be a minimal charge for inspection and/or evaluation of
returned goods.
2. Enclose the ADTS in plastic or any good water barrier material. Antistatic material is
3. If the original shipping carton is not usable or available, use a double-walled
4. Insert one foam cradle from the original shipment onto the floor of the box.
5. Before sealing the carton, include the following:
6. Seal the carton using gummed tape.
7. Address the carton to:
8. Label the carton with the following labels: THIS SIDE UP, HANDLE WITH
7-2
obtain an RMA number prior to returning any equipment. Have the following
information available when contacting Fluke:
a. the part number,
b. the serial number,
c. the purchase order number,
d. the billing and ship to address, and
e. the buyer's name and telephone number.
recommended.
corrugated carton with a 275-lb rating. The recommended carton size is
25 1/2 x 19 1/2 x 12 3/8 inches.
(The original foam cradles are of the same type of construction and are completely
interchangeable.) If the foam cradles are not available, cover the bottom and sides
with no less than 3 inches of N–95 foam strips. Arrange the strips in the
configuration illustrated in Figure 7-1.
a. Statement of the problem or service needed. Be specific. Include the name and
telephone number of a knowledgeable technician for consultation.
b. The part number, serial number, return address, and purchase order number.
10311 WESTPARK DRIVE
CARE, DO NOT DROP, and FRAGILE. (If the original shipping carton is utilized
for this shipment, the above markings are preprinted on the carton.)
W Caution
FLUKE CALIBRATION
HOUSTON, TX 77042
USA
Advertisement
Table of Contents
