Table of Contents
Advertisement
RUSKA 7750i
Users Manual
Menu | Test — Control
The Menu | Menu | Test | Control menu of the system is used to tune the controller. On new
instruments, the controller is tuned at the factory and therefore, the user should not need to access
or make any adjustments to the controller using this menu. This menu is user accessible in order
to provide a means to set-up the controller when control valves are replaced or to perform
maintenance on the controller. The menu is primarily used for diagnostics and repair, shown in
Figure 4-19, and will be discussed further in Chapter 6, Maintenance.
Menu | Display
The Menu | Menu | Display is used to conveniently monitor most of the sensor output parameters.
It is primarily used for troubleshooting. This display screen shows all available sensor readings
from both channels.
4-20
Figure 4-19. Menu | Menu | Test | Controller
Figure 4-20. Menu | Menu | Display
gme26.bmp
gme27.bmp
Advertisement
Table of Contents
