Table of Contents
Advertisement
Menu | Setup
Setup is used to configure the system. It includes setting all of the limits, user parameters,
user-defined units of measure, remote interface and system setup. On the RUSKA 7750i, the User
and Limits screens are separate for each channel and must be set up independently. The Units,
Remote, and System screens are identical in each channel. Any changes made in one channel
immediate affects the other channel.
Units of measure are selected for each independent channel. The Setup Units is
used to set up the user-defined units of measure.
Menu | Setup — Limits
The Menu | Menu | Setup | Limits menu is used to setup all of the limits in the system.
The pressure limits can be used to protect the device-under-test (DUT) from overpressure.
All limits are defined separately for each channel. Press the Mode key to switch between two
pressure channels. The Access code is common and is used for both channels.
Note
Figure 4-8. Menu | Menu | Setup
Figure 4-9. Menu | Menu | Setup | Limits
4
Local Operation
Menu
gme15.bmp
gme16.bmp
4-9
Advertisement
Table of Contents
