Delta Electronics Elevator Drive VFD-VL User Manual page 111

Chapter 4 Parameters|
Group 4 Multi-Step Speed Parameters
04-00 Zero Step Speed Frequency
04-01 1st Step Speed Frequency
04-02 2nd Step Speed Frequency
04-03 3rd Step Speed Frequency
04-04 4th Step Speed Frequency
04-05 5th Step Speed Frequency
04-06 6th Step Speed Frequency
04-07 7th Step Speed Frequency
04-08 8th Step Speed Frequency
04-09 9th Step Speed Frequency
04-10 10th Step Speed Frequency
04-11 11th Step Speed Frequency
04-12 12th Step Speed Frequency
04-13 13th Step Speed Frequency
04-14 14th Step Speed Frequency
04-15 15th Step Speed Frequency
Control
VF VFPG
mode
Settings
The Multi-Function Input Terminals (refer to Pr.02-01 to 02-08) are used to select one of the
AC motor drive Multi-step speeds. The speeds (frequencies) are determined by Pr.04-00 to
04-15 as shown above.
4-56
SVC FOCPG FOCPM
0.00 to 120.00 Hz
Factory setting: 0.00
Revision Nov. 2008, VLE1, SW V1.03
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01
Unit: 0.01