Delta Electronics Elevator Drive VFD-VL User Manual page 107

Chapter 4 Parameters|
03-00~02=7
Regenerative
torque limit
03-00~02=8
Positive/negative torque limit
Reverse
03-00~02=8
Positive/negative torque limit
03-00~02=6
Negative torque limit
07-19: Source of tor que offset
03-00~02: Analog input selections (AUI1/ACI/AUI2)
03-03~05: Analog input bias (AUI1/ACI/AUI2)
03-06~08: AUI1/ACI/A UI2 bias mode
07-19=1
03-03 Analog Input Bias 1 (AUI1)
Control
VF VFPG
mode
Settings
It is used to set the corresponding AUI1 voltage of the external analog input 0.
03-04 Analog Input Bias 1 (ACI)
Control
VF VFPG
mode
Settings
4-52
Positive torque
+
Analog input
03-00~02
Bias mode
03-06~08
03-03~05
SVC FOCPG TQCPG FOCPM
-100.0~100.0%
SVC FOCPG TQCPG FOCPM
-100.0~100.0%
Negative Torque
Analog input gain
03-09~11
+/-
B ias
03-00~02=5
Positive torque limit
Forward
03-00~02=7
Regenerative
torque limit
Preload
Factory setting: 0.0
Factory setting: 0.0
Revision Nov. 2008, VLE1, SW V1.03
Unit: 0.1
Unit: 0.1