To Advance Regeneration Cycles; To Cancel A Regeneration - Pentair AUTOTROL MAGNUM 293 Installer Manual

Installer manual Autotrol Magnum 293 - 298 Logix 742-762 - Operation
Double regeneration
1. After an immediate regeneration has begun, press
regeneration.
ð A flashing "x2" symbol indicates the second regeneration will start at the programmed
delayed regeneration time.
Immediate double regeneration
1. Press and hold
regeneration.
ð A solid "x2" symbol will be displayed.
8.3

To advance regeneration cycles

1. Simultaneously press
ð An hourglass will display while the camshaft is moving.
ð When the camshaft reaches next cycle, "C2" will be displayed.
2. Repeat and
8.4

To cancel a regeneration

1. Press and hold
ð Hourglass will flash once cancelled.
ð Camshaft will move to service position – may take 1 to 2 minutes.
68 / 110
to start the second regeneration immediately following the current
and to advance to the next cycle.
to advance through each cycle.
and for 5 seconds to cancel the regen.
again to plan a second manual
Ref. MKT-IM-012 / D - 03.02.2022