Basic Programming 742F - 762F/293 Valve Type - Pentair AUTOTROL MAGNUM 293 Installer Manual

Installer manual Autotrol Magnum 293 - 298 Logix 742-762 - Programming
6.3.4

Basic programming 742F - 762F/293 valve type

6.3.4.1 Program valve type
Set your valve type through the options.
1. Use and
ð Valve type flashes
2. Choose the 293 valve type.
3. Press to validate the system size selected and advance to
the next parameter using
6.3.4.2 Program system size
Set your system in filter configuration.
1. Use and
ð Three dashes than resin volume flashes.
2. Select "F" to validate the system as a filter configuration.
3. Press to validate the system size selected and advance to
the next parameter using
4. If an incorrect setting is programmed, see Resetting the
controller [ → Page 62].
6.3.4.3 Time setting
Set the current time.
1. Press when the time of the day is displayed.
ð Time flashes.
2. Adjust displayed time with
3. Press to validate the selection and advance to the next
parameter using
6.3.4.4 Day of week
Set the current day of the week.
1. Press .
ð Arrowflashes.
2. Adjust displayed time with
3. Press to validate the selection and advance to the next
parameter using
54 / 110
to scroll though valve type choices.
or .
to scroll though resin volume choices.
or .
and
or .
and
or .
.
.
Ref. MKT-IM-012 / D - 03.02.2022