To Advance Regeneration Cycles; To Cancel A Regeneration - Pentair AUTOTROL Performa 263 Installer Manual

Immediate double regeneration
A Press and hold
regeneration.
→ A solid "x2" symbol will be displayed.
8.3.

To advance regeneration cycles

A Simultaneously press
→ An hourglass will display while the camshaft is moving.
→ When the camshaft reaches next cycle, "C2" will be displayed.
B Repeat and
8.4.

To cancel a regeneration

A Press and hold
→ Hourglass will flash once cancelled.
→ Camshaft will move to service position – may take 1 to 2 minutes.
Ref. MKT-IM-011 / A - 15.06.2017
Installer Manual Performa 263-268 / LOGIX 740-760 - Operation
to start the second regeneration immediately following the current
and to advance to the next cycle.
to advance through each cycle.
and for 5 seconds to cancel the regen.
43 / 64