Resetting The Controller - Pentair AUTOTROL MAGNUM 293 Installer Manual

Installer manual Autotrol Magnum 293 - 298 Logix 742-762 - Programming
6.4.7

Resetting the controller

Info
Resetting the controller will delete all information stored in its memory, except the
time and day.
This will require you to reprogram the controller completely from the initial power-up
mode.
Resetting the controller:
1. Press and hold the
ð H0 and the system's set resin volume (or "F" mode) will be displayed.
2. If a history value other the "H0" is displayed, use
is displayed.
3. To reset the controller, press and hold
ð The controller will be reset to an unprogrammed state.
4. Go to Programming [
62 / 110
and for 5 seconds.
→ Page 46], to reprogram the controller.
to scroll through the settings until "H0"
for 5 seconds.
Ref. MKT-IM-012 / D - 03.02.2022