Basic Programming Mode Chart 742F-762F/293 Valve Type - Pentair AUTOTROL MAGNUM 293 Installer Manual

Installer manual Autotrol Magnum 293 - 298 Logix 742-762 - Programming
6.3.2

Basic programming mode chart 742F-762F/293 valve type

Parameter
description
Program valve
type
Magnum series
Program system
size
Time setting 1:00 - 12:59 AM
0:00 - 23:59 PM
Day of week
Time of backwash 1:00 - 12:59 AM
0:00 - 23:59 PM
Days override
(762F controller
only)
Days between
regeneration
(742F controller
only)
Backwash length
50 / 110
Range of Default
values value
255, 263, 268, None
278 and
5 - 100 / F None
12:00 PM
N/A None
12:00 PM
0.5 - 99 0
0.5 - 99 0
0 - 200 14
Units of
measure
N/A -
liters -
hour: -
minute
N/A -
hour: Dependent of time setting (AM or
minute PM).
day 0 = no days override.
0.5 = regeneration twice a day at
time of regeneration and 12 hours
later.
day 0 = no days between regeneration.
0.5 = regeneration twice a day at
time of regeneration and 12 hours
later.
minute -
Ref. MKT-IM-012 / D - 03.02.2022
Notes