Setting Up The Equipment - Furuno TZT9 Installation Manual

3.

SETTING UP THE EQUIPMENT

This chapter shows you how to set up your system according to the equipment you
have connected. You can do almost all operations on this equipment by just touching
the display, following the instructions below.
Touch control description
The touch control depends on the screen type. The basic operations to use at the in-
stallation setting are in the following table.
Tap
Drag
Pinch
Note: When both Rotokey
this manual states the operation by touch control.
Operation by a finger
Operating by a finger
Operation by two fingers
Operation by two fingers
Zoom in
TM
and touch control are available for the same function,
• Select a menu item.
• Select an object.
• Display the pop-up menu.
• Scroll the menu.
Change the radar range.
Zoom out
Function
Function
3-1