Adding Or Removing Media Resource Modules: Mp20 And Mp80 - Avaya G450 Quick Start Manual

Install Media Resources and PSU

Adding or removing media resource modules: MP20 and MP80

The G450 main board has four slots for media resources. Each slot can accommodate either an MP20
(Media Processor 20) module or an MP80 (Media Processor 80) module. An MP20 provides 20
channels, and an MP80 provides 80 channels. However, the G450 supports a maximum of 240 active
channels. Therefore, the following number of active channels can be supported: 20, 40, 60, 80, 100,
120, 140, 160, 180, 200, or 240. Note that 220 channels cannot be supported.
1. To insert an MP20 or MP80 module:
a. Locate the MP20 or MP80 module slot (see
Figure 9: Location of MP20 and MP80 modules
Figure notes:
1. MP20 or MP80 module slot
2. MP20 or MP80 module slot
b. Position the
it into an
MP20 or MP80
18 Quick Start for Hardware Installation: Avaya G450 Media Gateway
module at a 45 degree angle to the main board, and start inserting
MP20 or MP80
slot (see Figure
Figure 9).
3. MP20 or MP80 module slot
4. MP20 or MP80 module slot
10).