Installation (cont'd)
Levelling Adjustment
Position the case at the highest point. Set a long
magnetized level (4ft [1220 mm] or more) on either
underneath the deck or on top of the case. Ensure to level
case from front to back and side to side.
Leg Adjustment
Adjust the legs at each corner of the case to level out any
discrepancies in order to optimize case performance and
proper drainage.
Level
(4 ft[1220mm])
Note: To avoid removing concrete flooring, begin line up
levelling from the Highest point of the store floor.
A wrench or pliers may be used to adjust each base leg.
Turning the base of each leg clockwise will raise the height
of the case.
Turning the base of each leg counterclockwise will lower
the height of the case.
9
Level
(4 ft[1220mm])