Table of Contents
Advertisement
P/N 0520677_W
Placing shims at other locations will cause
uneven distribution of weight leading to piping
leaks, as well as sagging or wracked doors.
DOOR ADJUSTMENT
After leveling and joining the merchandisers,
adjust and level doors according to
manufacturer's instructions shipped with each
product. Factory settings may be lost due to
vibration during shipment.
4-Door Shown
Electrical Wireway
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Back
Back
Skid/External Base
Front
Front
Correct Shim Location is Critical
JOINING
Sectional construction means that two or more
merchandisers may be joined in line yielding
one long continuous display requiring only one
pair of ends. Joining kits and instructions are
shipped with each merchandiser.
To join like fixtures, a joining kit is required.
To join unlike fixtures, or like fixtures
operating at different temperatures, a 1
(38 mm) partition kit is required. To join same
temperature merchandisers on different defrost
cycles, a plexiglass partition kit is required.
a
ll joinTs musT be air
formaTion of ice or condensaTion
Shim
Here
Bottom Front
Support
Do not store items or flammable
materials on top of the unit.
Do not walk on case.
1
/
inch
2
-
TighT To prevenT
.
Freedom Line Reach-in
1-7
Advertisement
Table of Contents
