Table of Contents
Advertisement
User Information (cont'd)
Merchandising DON'TS
Products can be stacked too high on trays or display
ware, the Spiral serpentine coil underneathe the deck
pans are the main source for cooling for the case. If you
are not achieving the internal product temperature your
store desires, remove one layer. Monitor product interval
temperatures for several hours.
By no means use Foam, polycarbonate, wood,
synthetic solid surface materials or any other product
partition which acts as an insulator to display product.
When separating product from direct contact preferably
refer to Butcher Paper if desired.
Display ware used inside a VR3HV-M/F-EP MUST
BE FLAT BOTTOMED to make direct contact with the
cooled deck pans, keep in mind that most display ware
is designed with ridge along the bottom end or ridges
across the surface bottom for structural support. Often
times display ware has feet on the bottom of it to prevent
direct contact with the display pan. Refrain from using
any display ware which prevents direct contact between
the display ware bottom and the cooled display pans. Any
air space between the Hussmann opticold deck pans,
the display ware or the product will adversely affect case
performance and cause elevated product temperature and
early product loss.
optional
refrigerated or
dry storage
The following Display Wares or display configurations
are NOT RECOMMENDED and working outside of the
Hussmann requirements will adversely affect product and/
or case performance.
37
optional
refrigerated or
dry storage
optional
refrigerated or
dry storage
Air gaps can cause
product to be elevated in temperature
Advertisement
Table of Contents
