Adjusting Lcd Contrast; Adjusting Illumination Brightness - Pentax R-315EX(NX) Instruction Manual

4.2 Adjusting LCD contrast

Press [F4] while holding down the Illumination key
to access the screen for adjusting LCD contrast.
Pressing [F1] [ ] will lighten the contrast,
while pressing the [F2] [ ] will darken the contrast.
Press [ENT] to exit adjustment mode and
return to the previous screen.
• Pressing the Illumination key views the F3-RETICLE, F4-LCD and F5-ILLU.
• LCD contrast may be adjusted as necessary at any time.
• The contrast may be adjusted to any one of 25 levels.
• LCD contrast may be unappealing under certain environmental conditions such as high
temperature. Adjust the LCD contrast as described above in such situations.

4.3 Adjusting illumination brightness

Press [F5] while holding down the Illumination
key to access the screen for adjusting
illumination brightness.
Pressing the [F1] [ ] will decrease brightness,
while pressing the [F2] [ ] will increase brightness.
Press [ENT] to exit adjustment mode and
return to the previous screen.
LCD DENSITY ADJ
LOW
0
7
LCD DENSITY ADJ
LOW
0
7
MODE A 15°C
85° 39' 40"
H.angle
H.dst.
V.dst.
MEAS TARGET 0 SET DISP MODE
ILLU INTENSITY ADJ
DOWN
0
5
ILLU INTENSITY ADJ
DOWN
0
10
MODE A 15°C
85° 39' 40"
H.angle
H.dst.
V.dst.
MEAS TARGET 0 SET DISP MODE
HIGH
25
HIGH
25
S 0
UP
10
UP
10
S 0
33