How To Eject - Fujitsu PRIMERGY LTO4 User Manual

4.4

How to Eject

1
Check that this product is not operating (Two-color LED is blinking
green).
2
Press the Eject button.
Put the ejected data cartridge in the cartridge case to store.
CAUTION
Depending on the backup software, the data cartridge cannot be ejected using the Eject
button (NetVault, etc.). In this case, pressing the Eject button does not eject the data
cartridge. Eject the data cartridge by operating the backup software.
When this product is turned off, the data cartridge cannot be inserted or ejected.
80
・ When ejecting the data cartridge, do not stop it or push it back in. Also, do not
pull out the data cartridge before it has fully ejected. Doing so may cause
product failure.