Table of Contents
Advertisement
Chapter 2 Operator Panel Operation
2.11 Ejecting Tape Cartridges
6
A message indicating that the process is in progress is displayed. The processing-in-progress
message window displays the number of drives available for loading cartridges and the
number of drives in which loading is complete.
7
Loading into the selected drive is complete when an end message is displayed.
2.11
Ejecting Tape Cartridges
Tape cartridges that are loaded in a drive can be ejected to their home cells.
•
When an eject operation is performed, the drive goes offline temporarily. When the eject operation is
complete, the drive automatically returns on-line.
•
Normally, the tape cartridges from which data has been successfully backed up are ejected to their home
cells by the backup software. However, if host control is disabled for reasons such that a host closed
down, the tape cartridges must be ejected manually.
•
If ejection is attempted while the backup software is accessing the library, a message is displayed stating
that the library is busy. Retry the ejection when the library is no longer busy.
•
If the tape cartridges are loaded from other cabinets, this operation cannot be performed from the
operator panel. Use the remote panel instead.
Procedure
1
Click the [Manual Eject] button from the Operation menu.
Figure 2.32 Selecting the [Manual Eject] button
FUJITSU Storage ETERNUS LT270 S2 Tape Library User's Guide -Panel Operation-
57
Copyright 2020 FUJITSU LIMITED
End of procedure
P3AM-6932-06ENZ0
Advertisement
Table of Contents
