Fujitsu PRIMERGY LTO4 User Manual page 87

LED Display
Two-color: Blinking (amber)
Segment: 8
One-color: Off
Two-color: Blinking (amber)
Segment: A
One-color: Off
Two-color: Blinking (amber)
Segment: C (lower-case)
One-color: Off
Two-color: Blinking (amber)
Segment: L
One-color: Off
Two-color: Blinking (amber)
Segment: U
One-color: Off
Two-color: Off
Segment: L
One-color: On
Status and Action
Status Interface error
Action Check that the SAS cable is properly connected. If
the status does not change, replace the SAS cable. If
the problem still remains, this product or the SAS
card may fail.
Status Cartridge memory data abnormal
Action Eject and replace the data cartridge. If the problem
still remains after replacement, a failure may occur.
Status An unusable cleaning cartridge was inserted.
Action Press the Eject button to eject the cleaning cartridge
and insert a correct cleaning cartridge.
"5.1 Usable Cleaning Cartridge"(p.81)
Status An error occurred when loading the data cartridge.
Action Eject and replace the data cartridge. If the problem
still remains after replacement, a failure may occur.
Status An error occurred when unloading the data car-
tridge.
Action Eject and replace the data cartridge. If the problem
still remains after replacement, a failure may occur.
Status The Eject button was pressed while application
software was running.
Action Perform ejection using the application software.
E
87
7 Troubleshooting