Fujitsu PRIMERGY LTO4 User Manual page 59

CAUTION
• Eject the data cartridge from this product whenever turning the server off. After
inserting the data cartridges into this product, the magnetic tape recording
surface is exposed. If this situation continues for a long time, dust may stick to the
recording surface or the magnetic tape may be damaged. This might shorten the
data cartridge's life.
• Eject data cartridges when not using them.
• If the front surface of this product is stained, wipe with a soft, dry cloth or a cloth
wet with water or mild detergent. Do not use benzine, thinner or any volatile
compounds.
Recycle
When scrapping this product, contact an office listed in "Appendix C Contact Information" ( p.100).
This product must be disposed of as industrial waste.
Checking the Items Supplied
Before using the product, check that no supplied or attached items are missing.
If any items are missing, contact an office listed in "Appendix C Contact Information" ( p.100).
• Tape Drv LTO4 Ultrium4/Ultrium3/Ultrium2 800GB (this product)
(*1)
• Screws (x4)
• Cleaning cartridge
• "PRIMERGY LTO4 UNIT (PG-LT401) Device Driver for Windows" (driver floppy disk)
• User's Guide (this document)
*1: For custom made service (PGBLT401/PGBLT401C), items are supplied with the server.
Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
Linux is a trademark or registered trademark of Linus Torvalds in the USA and other countries.
Red Hat and all Red Hat-based trademarks and logos are trademarks or registered trademarks of Red
Hat, Inc. in the USA and other countries.
Other product names used are trademarks or registered trademarks of their respective manufacturers.
Other products are copyrights of their respective manufacturers.
Copyright FUJITSU LIMITED 2008
(*1)
E
59