Fujitsu PRIMERGY LTO4 User Manual page 63

LED display
There are three LEDs in this product, they indicate self-diagnostic tests when the power is turned on,
and show status or errors during operation by using a combination of LED displays.
LED display examples are as follows.
" LED display specification list"(p.64)
Display examples for LED are as follows.
LED Display
Display examples for error status are as follows.
LED Display
Two-color: Blinking (amber)
Segment: C
One-color: On
Two-color: Blinking (amber)
Segment: 5
One-color: Off
Two-color: Blinking (amber)
Segment: 6
One-color: Off
Two-color: On (green)
Segment: –
One-color: Off
Two-color: On (green)
Segment: Off
One-color: Off
Status
Action
Status
Action
Status
Action
Status
PowerOn (No cartridge): Power is supplied and a
data cartridge can be inserted manually.
Ready: Power is supplied and a data cartridge is
recognized by the sensor. When the data cartridge
has been loaded, this product can be used.
Status and Action
Cleaning request: Needs cleaning.
Clean this product with a cleaning
cartridge.
"5 Cleaning"(p.81)
If the status does not change after
cleaning, the media may be worn out.
A hardware abnormality was
detected.
(1) Turn the server on and off.
(2) If the problem still remains,
replace this product (LTOUnit).
(3) If the problem still remains even
though the above actions are taken,
replace the DC cable or power unit of
the server.
Data cartridge abnormal
Replace the data cartridge with new
one. If the problem still remains, a
failure may occur.
2 Component Names and Functions
E
63