For Using Fdd (Usb) When Operating Asr - Fujitsu PRIMERGY LTO4 User Manual

3.7

For Using FDD (USB) when Operating ASR

• Notes on FDD (USB) recognition at server startup
If the FDD (USB), with a floppy disk inserted, is not connected at server startup, BIOS cannot
recognize the FDD (USB). During OS installation of Windows/Linux, or when executing ASR,
make sure to connect the FDD (USB) with a floppy disk inserted before server startup.
• Notes on floppy disk exchange recognition
When performing system recovery or installing Windows manually using the Windows backup
data with the following software, system recovery/installation might not be performed properly.
This is caused by the device driver being unreadable due to recognition failure of the floppy disk
media replacement.
- Windows Server 2003 Automated System Recovery function
After pressing the [Enter] key in accordance with the procedure on the screen, if the floppy disk
access LED on the FDD (USB) does not turn on and the floppy disk is not accessed, follow the
procedure below.
1. Eject the floppy disk and wait for 2 seconds or longer, then press the [Enter] key several
times.
2. Insert the floppy disk and wait for 2 seconds or longer, then press the [Enter] key.
If the floppy disk cannot be accessed, perform the procedure above again.
74