3.2
Installing and Connecting to the Server
For the procedure for installing this product in the server, refer to the "User's Guide" in the "PRIM-
ERGY Startup Disc" provided with the server and see the description about the internal 5-inch
option.
For the procedure for connecting each cable, refer to the following.
For TX300 S4
For RX600 S4
Extension power cable
When installing this product in the PRIMERGY RX600 S4, connect the extension power
cable to the power connector.
The extension power cable is attached to the SAS cable (PG-CBLA004, PGBCBLA004).
68
[Rear]
Power cable
[Rear]
SAS cable
SAS cable