Fujitsu PRIMERGY LTO4 User Manual page 96

3
Add the following statement to the asr.sif file in the ASR floppy
disk.
Using a note pad, add the following four lines (including [INSTALLFILES]) to the section
under "DISKS.GPT" in asr.sif file.
・ For Windows Server 2003
[INSTALLFILES]
・ For Windows Server 2003 x64
[INSTALLFILES]
4
Put a label on ASR floppy disk from the command prompt.
Check whether the label is written in the property.
5
Create a winnt.sif file and input the following statement.
Using a note pad, create a winnt.sif file and input the following nine lines (including a blank
line). Then save it in ASR floppy disk.
96
1=1,"ASR","%FLOPPY%","QLTOx32.sys","%TEMP%\QLTOx32.sys","Quantum ",0x00000026
2=1,"ASR","%FLOPPY%","QntmLto.inf","%TEMP%\QntmLto.inf","Quantum ",0x00000026
3=1,"ASR","%FLOPPY%","qntmlto.cat","%TEMP%\qntmlto.cat","Quantum ",0x00000026
1=1,"ASR","%FLOPPY%","QLTOx64.sys","%TEMP%\QLTOx64.sys","Quantum ",0x00000026
2=1,"ASR","%FLOPPY%","QntmLto.inf","%TEMP%\QntmLto.inf","Quantum ",0x00000026
3=1,"ASR","%FLOPPY%","qntmlto.cat","%TEMP%\qntmlto.cat","Quantum ",0x00000026
[Example] C:\> label a: ASR
[Data]
AutoPartition = 1
MsDosInitiated = 0
UnattendedInstall = Yes
[Unattended]
OemPreinstall = YES
OemFilesPath = a:\
OemPnPDriversPath = TEMP