NEC Neax 2000 IVS2 Manual page 95

CHAPTER 3 SYSTEM DATA PROGRAMMING
ISDN Feature Programming
A
CM35
Assign the destination of DID Call
CM51
transferred when the station is busy/
unassigned/no answer.
Assign the Number Conversion Block No.
CM76
When the data for CM35 YY=18 is set to
"0" (Received digit conversion is to be
provided), assign the data for interpreting
the digits received.
END
Page 84
DESCRIPTION DATA
YY=18 Received Digit Conversion
•
(1) 00-63: Trunk Route No.
(2) 0 : Provided
1 : Not provided
YY=00 No Answer
•
YY=03 Busy
•
YY=06 Unassigned
•
(1) 00-63: Tenant No.
(2) Destination:
X-XXXXXXXX: Station No.
E000 : Attendant Console
EBXXX: Announcement Service:
Digital Announcement Trunk
No. set by CM10
YY=00
•
(1) X-XXXX: DID No.
(2) 000-999: Number Conversion Block
No.
• YY=01 Day Mode
• YY=02 Night Mode
• YY=03 Mode A
YY=04 Mode B
•
(1) 000-999: Number Conversion Block
No. assigned by CM76
YY=00.
(2) X-XXXXXXXX: Station/Data station/
ISDN line station No. to
be terminated
DXX: Change Terminating System to:
D04: Direct-in Termination
D14: Attendant Console
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0