Home-Side Trunk Programming - NEC Neax 2000 IVS2 Manual

CHAPTER 3 SYSTEM DATA PROGRAMMING
Event Based CCIS Programming

Home-Side Trunk Programming

START
Assign a trunk number to each channels
CM07
on the Home-Side trunk.
NOTE: The Virtual channel number on
the Home-Side trunk must be an
even number (00, 02, 04, ... 30).
Assign a trunk route number to each trunk.
CM30
Assign trunk route data to the voice
CM35
channels and common signaling channel
of the Event Based CCIS route, as Tie
Lines.
Determine trunk seizure sequence.
Provide the common signaling channel
and voice channel route with No. 7 CCIS
facilities.
A
Page 122
DESCRIPTION
INITIAL
DATA
YY=05
•
(1) 3200-3230: Virtual channel No. 00-30
(Even No.) of the Home-
Side Trunk
(2) D000-D255: Trunk No.
Trunk No. already assignment by CM10
should not be used.
YY=00
•
(1) 000-255: Trunk No.
(2) 00-63: Trunk Route No.
• YY=00
(1) 00-63: Trunk Route No.
(2) 04: Tie Line
YY=01
•
(1) 00-63: Trunk Route No.
(2) 2: DP
YY=04
•
(1) 00-63: Trunk Route No.
(2) 2: Answer signal arrives
• YY=09
(1) 00-63: Trunk Route No.
(2) 06: 2nd DT/Timing Start
YY=83
•
(1) 00-63: B channel Trunk Route No.
(2) 0: As per CM08>078
YY=90
•
(1) 00-63: Trunk Route No.
(2) 0: No. 7 CCIS
NEAX2000 IVS
2
ISDN System Manual
ND-70919 (E), Issue 1.0